GROHE 65301 or 62476-03 spare part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spare part for mounting the cover of GROHE wall connection elbows in the shower.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Spare part for mounting the cover of GROHE wall connection elbows in the shower.
The clip of the original part breaks easily and the part cannot be purchased separately. Therefore, in such cases, the entire wall connection elbow must be replaced. I have recreated the part. The original part number is 65301 or also 62476-03. It fits and functions exactly like the original part, but care should be taken when handling it, as the clip is less durable than the original due to the layered structure of 3D printed parts.
For printing:
- Use PETG only or higher (heat resistance required, warm water!)
- Layer height: 0.12 mm
- 4 perimeters
- 100% infill
- Supports required (I used "Support for PLA/PETG" as a support/raft interface, but standard PLA should also work; generally, a support/raft interface material is recommended to improve surface quality and dimensional accuracy)
- No tree support (yields poorer results)
Happy printing!