MiniMax: Minimal Scales For the "Maximal" CRJB Pocket Knife
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement scales for the "Maximal" pocket knife, but designed to be smaller and lighter than the stock scales.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
The CRJB Maximal (designed by David C Anderson) is a magnificent knife. For $50, you really can't beat it. However, I found the stock scales to be too big and round for me. That might be due to my “slightly averager than large” hands. Fortunately, the knife has full liners that are inlayed into the stock scales. These scales are (mostly) flush with the liners.
Clip Placement (Righty, Lefty, No Clip)
The scales in the 3MF and STL have the clip placed for right-handed use, but the knife itself is ambidextrous, so just mirror the whole thing if you're making them for a lefty. If you don't want a clip at all, you can make a second mirrored copy of the “front” scale.
How to Print
I've only printed this in PETG, but it probably doesn't matter very much. I recommend lots of perimeters (~10) and 100% infill. No supports; they are designed in. There will be two “tabs” on each scale that you just pop off to expose the screw holes.
Custom inlay (as shown) can easily be added in the slicer.
Assembly
You just need some Torx drivers. This design uses all of the original hardware.
