Creality Ender 3 V3 Plus Filament Runout Sensor Relocator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Relocates Filament Runout Sensor from the Gantry Frame Assembly to the left Pull Rod
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 107
- Wydruki
- 1
- Wyświetlenia
- 472
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Stock location for the filament runout sensor moved vertically and pushes/pulls filament at the start of every print
Disliked having to reset my filament roll after the start of a print to make sure it wouldnt tangle, so I designed a bracket to relocate the filament runout sensor to somewhere that is stationary. Still lets the PTFE tube reach the top right corner of the frame with no issue
Uses the stock screws for the sensor (force-threaded) and the cable holder (counter-bored) on the pull rod to secure into place
I've made multiple versions with different print orientations, with and without clips, to replace the cable holder clip that was originally there, but it's also still compatible with the cable clip on the runout sensor itself