1 / 1
Globoid worm drive demonstration model
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple globoid worm drive demonstration model for education
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
This is one of my first model, which i made for exploring possibilities of 3D-printing during my learning 4 year ago. It's work properly, but designed without enough knowledge about optimization for printing - that's why you may have some problems with assembling of this model - i'm sorry)
Synthesis of gear engagement was done in KOMPAS-3D (popular russian CAD software). Gear ratio - 1:30
Recommendations:
- I recommend to turn on "slowing-down for overhangs" setting and choose “inner-outer" perimeter order in your slicer for worm gear. This detail is also needed vertical orientation on the printer table
- For best results I recommend to use for assemble cyanoacrylate glue or solvents for your filament (like acetone or dichlormethane)