Locking Bolt Repair of Plastic Piece with Guiding Notch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My translation is catastrophal, but professionals might recognize the part I repaired!
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 2
- Wyświetlenia
- 63
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My friend asked me for re-engineer the plastic slider as the integrated metal pin was worn out.
I took measures, designed the piece with TinkerCad. I designed two versions:
- At the place where the metal pin was I made a ø3.4mm hole for a M4 thread and put in a 4mm grub screw.
- Alternatively I integrated the pin and printed it.
As I don't really know what kind of load comes to the pin, either it just broke out because of misoperation, my friend can find out what works best for him.
Therefore, I made a couple of pieces, some in PLA, some in PLA-CF and some in PETG-CF. Each version with grub screw and with printed pin.
Be careful using weapons!
Explore my other Printables: https://www.printables.com/de/@Tritschi