TTC450 X reinforcement - TTC450 zesílení X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed part to connect linear guide Machifit MGN12 with MGN12H trolley to Z axis holder to strenghten the X bridge
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Reinforcing part to strenghten the X guide of TwoTrees TTC450 milling machine.
Designed for combination with MGN12 linear guide with length 600mm and trolley MGN12H.
I bougth it here but you cany buy it anywhere
https://dratek.cz/arduino/148388-kolejnice-linearniho-vedeni-s-vozikem-mgn12-delka-600-mm.html
Print ABS, PET-G …. Infill 30%, 5 perimeters for sufficient strenght, layed according to picture, I'd recomend using organic support due to the overhangs.
Layer height thicker and structural setting
Pro zesílení vedení osy X routeru TwoTrees TTC450
Použití s vedením MGN12 dély 600mm, já vedení kupoval tady, ale dá se koupit i kdekoli jinde
https://dratek.cz/arduino/148388-kolejnice-linearniho-vedeni-s-vozikem-mgn12-delka-600-mm.html
Tisk ABS PETG a podobné odolnější materiály, poloha dle obrázku, výplň 30%, alespoň 5 perimetrů, doporučil bych zapnutí podpěr kvůli přesahům.
Výšku vrstvy klidně větší a použít struktural profil.
