Neo Foxpup (Foxpup remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified version of the Foxpup blaster that improves on the ergonomics and features.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Neo Foxpup is a project to turn the Foxpup into a more potent blaster, by playing to the strengths of its compact form and slide prime.
The new action is reminiscent of the JSPB Ninja Stringshot, which braces the slide against the shoulder using a form of stock and operates by pushing the main grip forward to prime instead of pulling the slide back, allowing for a fast action while being compact. This is done by adding an improved stock piece to the back that replaces the T-Pull (this was also present in the original design but wasn't as comfortable to use and also flexed a bit)
Other features of the Foxpup have been improved as well, like the front slide having a riser/handstop for a more comfortable prime while allowing to still aim down a sight. The back slide is mostly the same but has a new design for the sling mounts to be more robust by using the foxbat slide pins. The grip and magwell have also been updated to be separate prints (and the grip changed to a Lynx grip) which allows for easier printing and more comfortable ergonomics. There is also a new catch holder piece that uses heat set inserts for repeat disassembly and maintenance
The Neo Foxpup design does kinda lack any detailing features like slide serration or any kind of knurling/greebling as it is my first CAD project, but i am planning on eventually touching up on that and making a new magwell that uses a proper magazine release eventually (also a piece that replaces the T-Pull as well, but allows the user to attach N-Strike stocks bc funny). The ergonomic properties are also part of a larger project called Manganese, which is a bullpup handcannon based off ZINC/31K internals and this was the implementation of said properties, so stay tuned for that : )
The design reuses hardware like Foxbat slide pins, but introduces 3 M3x8 flat head screws and 3 M3 5.7x4.6mm heat inserts for the stock base and NeoStock, and 3 more inserts plus M3x25 (any type) screws for the stock buttplate (NeoStock short only uses the 3 short screws and inserts) It also uses 5 more M3 flat head screws and M3 short 3x4mm inserts for the new Catch Holder piece.
The step files should be provided in case you want to adjust things, since the slide does only have one side pic rail on the left so it may not be ambidextrous friendly.