Wyze V4 Smart WiFi Camera Mount Hanger Bracket for Elegoo Centauri Carbon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hanging bracket for Wyze V4 Smart Camera. Allows full closure of front glass door on Elegoo Centauri Carbon
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 162
- Wydruki
- 0
- Wyświetlenia
- 810
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Hanging bracket for the Wyze smart camera, v4 model. This allows the glass front door to fully close shut. The top edge of the bracket fits inside front edge of the Centauri Carbon, either with top glass, or a printed riser. When hanger bracket in place, the camera will be in front of the glass door and block it from opening. Or, if open door, the hanger bracket and camera will just be suspended in the opening. I printed this with some organic tree support, since I am printing this upside down. But, it might print ok without supports. I used PETG, layer 0.28, infill 12%, pretty standard settings, Temp 242, Bed 80.
I use this to monitor longer prints while I am away, like at work. I also have the Wyze smart wifi outlet, so I can shut everything down, if I notice the print going badly, before it goes on printing for hours and wasting a bunch of filament.