Pixel 8 rigid phone case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kinda slim phone case but still 3.5 mm thick for lens clearance.
- Ocena
- 3 / 5
- Polubienia
- 4
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 430
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by Google Pixel 8 Case by @gleonard3. I wanted slimmer case walls and less interference from the edge of the back of the case.
Printed from PETG my implementation weights about 15 g. I would not recommend printing from PLA due to creep and ABS might lack layer adhesion.
I were aiming to provide some gap between the case and the edges for fall damage protection but in reality case seems to be rather tight. Who drops their phones, anyway?
3mf file is provided for reference of my settings (i.e. infill width 0.4 mm with honeycomb 15%) and not for direct printing as I have a bit customized setup.
UPD I printed another version in SBS filament and I love it. Visually it's about the same (brownish-transparent filament), but it has slight give to it and less slippery.
UPD2 Uploaded updated model. The main reason to increase thickness in the base of the wall to prevent kinda fatigue cracking there. Also removed top cutout replacing it with just the mic hole. Overall stiffer case.