Uncle Scrooge's Money Bin v1.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model of Scrooge McDuck's money bin, as a piggy bank, or simply a display item.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 58
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The exterior of Uncle Scrooge's money bin.
This was modelled after Don Rosa's pseudo architectural drawings which show the bin to be 120 feet wide by 127 feet high. Scale is hence 1mm to 1 foot, or approx 1:305, if printed in default size (120 mm wide).
The model is hollow with approx 1 cm walls and an open bottom. Also available as a piggy bank with a coin slot in the roof and a closed bottom. In Scrooge's spirit, money only goes in, but not out of the bin.
Expect to lose some detail if you do not print relatively large. Supports are recommended, especially for the entrance and the overhang at the top of the main walls. No supports should be necessary on the inside, as the inside roof is slanting inwards around 45 degrees.