First Flush Bypass Filter for water collection for HT DN 40 pipes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A first flush bypass filter for rainwater collection from a rooftop for HT DN 40 Pipes with additional coarse filter
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Notice: This is my first upload and it is work in progress. Please give me feerdback on what to improve or upload your improvements right away.
Origin/Idea: I have a 80 L water tank on my balcony to store water for my bonsai irrigation system. However, the rooftop where I collect the rainwater from is quite dirty after a dry period and the irrigation system gets clogged. This divice should collect some of the dirt in a pipe and close it afterwards. Then, the clean water is collected and the first flush water can drain slowly. For further understanding, please read this article:
https://www.harvesth2o.com/first_flush.shtml (Also source of the figure (second image)
THe two pipes where glued together with water resistant superglue. to ensure a nice closure of the top part of the pipe.
I also added a coarse filter for the initial collection into the pipes.
I have not tested the system thoroughly, so this is work in progress.
I also plan to integrate a fine-mesh filter after the bypass to further sort out dust before it is collected in the main tank.