1 / 1
Bento Box v2 fan duct base to fit Creality K2 Plus — zdjęcie 1

Bento Box v2 fan duct base to fit Creality K2 Plus

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The stock base doesn't fit, these are the mods needed to make it work well.

Ocena
0 / 5
Polubienia
9
Pobrania
32
Wydruki
0
Wyświetlenia
703
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The stock base doesn't fit, these are the mods needed to make it work well.  I put a couple of strips of thin double-stick tape near the front to keep it in place, and also help tilt it back to make sure it won't interfere with the plate.  I've been using for three months and it's been perfect, no interference, and the filter is effective.  I've tested particulates and VOC with a meter, as well as the smell test.  The stock filters are pretty useless.

I printed with Sunlu EasyPA which is temp stable and super easy to use.