1 / 3
Support amovible pour émetteur RC / Removable holder for RC transmitter — zdjęcie 1
1 / 3

Support amovible pour émetteur RC / Removable holder for RC transmitter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stockage de l'émetteur en position semi-verticale ----- Storing the transmitter in a semi-vertical position

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

FR

Ce support permet de maintenir l'émetteur en position semi-verticale pour, entre autre, le programmer ou éviter toute dégradation lorsqu'il est  posé au sol.

Il se fixe autour de la poignée par un dispositif d'aimants permettant un démontage rapide lors du rangement de la radio dans son étui.

Les paramètre d'impression sont les suivants :

  • Filament PETG

  • Buse 0,3 mm

  • Hauteur de couche : 0,2 mm

  • Remplissage : 50%

  • Utilisation de support dans les cavités en fonction de la position d'impression

Nécessite l'utilisation d'aimants néodymes :

  • Quantité : 4

  • Diamètre 6 mm

  • Épaisseur 3 mm


EN

This support allows the transmitter to be held in a semi-vertical position, among other things, to program it or prevent damage when placed on the ground.

It attaches around the handle with a magnetic device allowing quick disassembly when storing the radio in its case.

The print parameters are as follows:

  • PETG filament

  • 0.3 mm nozzle

  • Layer height: 0.2 mm

  • Infill: 50%

  • Support material used in the cavities depends on the print position

Neodymium magnets are required:

  • Quantity: 4

  • Diameter: 6 mm

  • Thickness: 3 mm