Star Trek: Lower Decks Agimus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build the nefarious mechanical overlord Agimus.
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 353
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Happy to debut Agimus! This is a highly detailed model kit that can be made on printers with a minimum bed size of 20x20 cm. The assembled model is large, but not too big to move around.
Features:
- Space for electronics and cutouts for lights
- 6 articulated arms’ that can be extended and posed
- Swappable ‘Lord Agimus’ horn parts
- Detailed internal bay for storing 2 drones (which can be found here)
- Removable back door with latch to secure it
- Rear power port display (behind back door inside)
- Slide out bottom panel with space for storing swapped parts and electronics access
Update August 30 2025 - Fixed the top rectangular light slot on the sides so there won't be a thin layer bridged over it, which seems to cause uneven top layers.
Update August 25 2025 - Fixed the bottom body that was missing 2 connector slots, and loosened the slot on the inside base so the drones will fit better. Also fixed the flaps that wouldn't rotate connected to the arm.
***This is a huge print. Please check out the files in depth and plan out how you're going to proceed to avoid wasting filament.
Also note that this is all experimental for me, so if you find any parts that need any fixing please let me know right away.