Sniper Elite Organizer (Base Game + Eagle's Nest)

I did two things to the original version of this organizer. I replaced the coin tray for the Deluxe Upgrade Kit, and replaced it with a tray for the bag and player aids. Then I noticed that the countdown tracker did not fit or there was uneven lift, so I did some cutouts on two of the card trays and the bag tray I created.

After doing these small modifications, I was able to fit everything from the base game and the Eagle's Nest expansion without lift on the box. The card trays also hold sleeved cards as seen in the pictures (Sleeve Kings 63.5x88mm 60 microns).

The way it worked for me, is to put the maps and booklets first, then the trays, and lastly the tracker. If the booklets are put on top of the trays, some lift might appear (although barely noticeable).

I was also able to store the box vertically without issues.

Just print each file once. I printed this with a 0.6mm nozzle, 0.4mm layer height (0.2 initial layer). On a Ender 3 V3 SE (220 x 220 x 250 mm), and I was able to put two trays per print. Three prints and around 6-7 hours later I had everything ready.

This is my first upload. If this works for you, like and let me know.

I don't own the Deluxe Upgrade Kit so I cannot say if this will work with it, although ti might work with some modifications to the original version.

Original created by Nicolas Picouet from BGG who allowed me to upload this modified version of his organizer. Check his website for the original version that fits the base game, Eagles Nest expansion,and the Deluxe Upgrade Kit components in one box, and other organizers he has created.

https://board-game-organizers.web.app/posts/sniper-elite.html