1 / 4
HULA Sovol Zero Anti-Vibration Damper Feet — zdjęcie 1
1 / 4

HULA Sovol Zero Anti-Vibration Damper Feet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

HULA Anti-Vibration Damper Feet Adapter for Sovol Zero

Ocena
0 / 5
Polubienia
12
Pobrania
50
Wydruki
1
Wyświetlenia
358
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Hula Ant-Vibration Damper Feet adaptor for Sovol Zero

I have Hula Anti-Vibration feet on several of my printers, a mix of XIC, Prusa Core 1, Elegoo Centauri Carbon. When I got the Sovol Zero for a quick prototype printer, straight away I wanted to put Hula Feet on it. 

*Also note  for some strange reason Sovol made the frame around the back right foot different from the rest, its does not have the cut out the rest do, so you will need to use backrightfoot.stl file for location. 


This fits in the standard Hula Feet that look like this:


 

 

 

 

 

I have also included the part in black in that picture in case your Hula kit has a different receptacle, or even if it comes with them I have found them to not be very consistent with tolerance. 

I printed in PETG - 0.2mm layer height
3 Wall
4 Top Shell
4 Botton Shell
15% Infill - Cross Hatch or Gyroid
No Support unless you are printing the receptacle as well, that needs supports.

Tagi