8BitDo Ultimate 2C wall mount with charge cable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
8BitDo Ultimate 2C wall mount with charge cable pass through and keyhole mount.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 105
- Wydruki
- 4
- Wyświetlenia
- 413
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
Update/Warning: Do not print in PLA, print in PETG or ABS/ASA. PLA creeps over time and the mount will eventually fail to hold on to the controller. I originally printed mine in PLA and they worked fine for about 1 year before the controllers started falling out.
I used the original cable that came with the controller. Using other cables may or may not work. Excess cable can be tucked into the cavity behind the controller.
Supports are only needed for the keyholes, the rest of the model should print fine without them.
The template makes mounting a lot easier. Screw the template to the wall, slide it off, slide on the controller mount. If desired, the other hole can then be used to screw it down so it will not slide off anymore.