Plinko Dice Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dice tower but plinko style! Will need to supplement this print with a piece of glass or plexiglass. The dimensions…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
Dice tower but plinko style! Will need to supplement this print with a piece of glass or plexiglass. The dimensions are on the picture 164mmx134mmx3.175mm. This should fit all standard sized dice d4's, d6's, d8's, etc etc. Print on its back and you shouldn't need supports.
I've also added a version with 1mm thick supports built into the groove for the plexiglass that should be relatively easy to snap off
Print Settings
Printer:
Prusa i3
Rafts:
No
Supports:
No
Resolution:
.2-.4
Infill:
30%
Notes:
There is only one section on this whole print that will have any infill and it will be on the wedge shape near the bottom of the tray. Choose whatever infill you'd like.
Category: Toy & Game Accessories