1 / 3
Mega Zero Creality MK8 hot end (Ender-3) compatible fan duct — zdjęcie 1
1 / 3

Mega Zero Creality MK8 hot end (Ender-3) compatible fan duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you have a pair of M3x20mm screws around you should use this replacement fan shroud and duct instead. It replaces…

Ocena
5 / 5
Polubienia
14
Pobrania
185
Wydruki
1
Wyświetlenia
1084
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

If you have a pair of M3x20mm screws around you should use this replacement fan shroud and duct instead. It replaces the whole assembly, and fits perfectly on the Anycubic Mega-Zero v1 with an MK8 end, just move the existing fans over.

For anyone else who wants to attempt this, I did have to modify the bottom of the stock metal fan shroud with a Dremel for clearance of the new block and sock.

This is a 2mm shorter version of the factory "wind nozzle" blower fan duct. I needed a quick replacement that was compatible with a Creality MK8 (Ender-5) hot end with a titanium all-metal heat break, as the creality hot end combo is slightly shorter than the factory part.

FreeCAD project is provided as well.

Print Settings

Rafts:

No

Supports:

Yes

Resolution:

0.20 mm

Infill:

20

Filament: Hatchbox PETG Green


Notes:

This should be printed in a vertical orientation in the orientation that makes it as tall as possible, using supports off the build plate alone. Check the example screenshot to see how I made this work for me.

Category: 3D Printer Parts

Tagi