Phaetus neXt-G UHF Stealth Burner Filametrix Print Head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified for Filametrix. Some changes from stock so read below. Use the files to modify to your liking.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
You'll need to make some changes yourself (probably)
This configuration deviates from “stock” in a few ways. I am posting the STEP files here so that it may save someone else some modeling time…. but for now I can't be bothered to mod for stock myself.
I modified my original Dragon housing to use a drill bushings instead of the drilled out M3 nut. https://www.mcmaster.com/96990a141/. I was having problems with getting good, consistent cuts, wanted better constraint for TPU (still haven't tried yet)… and I hated the nut >:c
I mounted the hotend with the wires on the right side (with regard to the picture from the parent model), and so the cutouts for the cooling air cowl are made for that orientation. I broke my heater when bending the coupling and was impatient for replacements, so I used Rapido 2 heaters. The wires stick out at 90 deg compared to the nextG stock heater… this is also favorable to the new hotend orientation.
I'm a few prints in and everything seems fine… but I'll come back and update if something doesn't hold up (or melts).