EC5 Knockoff Clone Connector housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EC5 Knockoff Connector Housing for iMars and other jumpstarter powerbanks
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
EC5 Knockoff Connector Housing – Female Side
This is a custom-designed connector to solve a compatibility issue with certain power banks that use a knockoff version of the EC5 connector. These connectors utilize standard EC5 pins, but the outer plastic housing differs from the original EC5 design.
This file is for the female side only of the connector. You have two options for pins:
Salvage EC5 pins from an existing connector
Use a ready-to-assemble EC5 kit and insert the pins into this housing
Print recommendations:
Material: PLA works, but something more heat-resistant (like PETG or ABS) is recommended for durability and thermal safety
Layer Height: 0.2 mm
Nozzle: 0.4 mm