PIttsburgh Steelers 4-Inch Drink Coaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 4-Inch Drink Coaster with the Pittsburgh Steelers Logo on the face.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pittsburgh Steelers 4-Inch Drink Coaster!
This model was originally designed as a test for myself while using a new CAD program. As a result, the coaster is not a perfect representation of the Steelers Logo. I was trying different methods to try to learn a bit about the software at the time, so things like the “Steelers” text are not logo-accurate. Despite it not being perfect, I've decided to release it to the public for personal use.
This model is designed with multi-color printers in mind. That means it is not optimized for single-color printers. You could conceivably go in and place a pause before each of the hypocycloids begin to print, but this method would be cumbersome at best.
Recommended Print Settings:
- 0.2mm Layer Height