1 / 5
Pictureframe for pictures or photos 15cm x 10cm — zdjęcie 1
1 / 5

Pictureframe for pictures or photos 15cm x 10cm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple pictureframe for pictures 15cm x 10cm without any support and printed in one part.

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Part as seen on photos printed with: Anycubic Kobra Plus with PEI upgrade. Printed in PLA (Polymaker Polyterra Peanut). Printed with adaptive layerheight (or 0.2mm recommended). Infill 100%. Don't activate support, I already put “support” below the 8 hinges. Printtime about 1h. Cut the support below the hinges with a sharp razor blade (as shown in the picture). Bend the hinges back, add the photo and bend them back to fix the position. To attach the frame to the wall, I used UHU Patafix.

Tagi