Grabbox in different sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a box I designed with an opening in the lid to grab whatever is in there.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi everyone,
I designed these boxes to get rid of the mess in my kitchen drawers. I use them for trashbags, freezer bags, IKEA ISTAD zipping bags.
Each box is printed in two parts (lid and base, no supports needed) and snaps together nicely.
The dimensions in the filenames are the INNER dimension. The outer dimensions are 5.1mm bigger in legth and width and 3mm in height (so e.g 190x60x60 inside is 195,1 mm x 65,1 mm x 63 mm on the outside).
The tolerances are tight so you might need to adjust you xy-compensation. I printed them without xy-compensation on a mk3s+ im matte black PLA from eSUN without any problems.
Here is a list of the availible sizes:
| Name | Inside (in mm) | Outside (in mm) |
| Grabbox_120x60x60 | 120 x 60 x 60 | 125,1 x 65,1 x 63 |
| Grabbox_150x60x60 | 150 x 60 x 60 | 155,1 x 65,1 x 63 |
| Grabbox_190x60x60 | 190 x 60 x 60 | 195,1 x 65,1 x 63 |
| Grabbox_250x60x60 | 250 x 60 x 60 | 255,1 x 65,1 x 63 |
If you need other dimensions please feel free to contact me. I will upload them for you (but without prior testing).