1 / 7
end of the road sign geocache — zdjęcie 1
1 / 7

end of the road sign geocache

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

So I to the end of a road and the end of the road sign would not take my normal goto for these…

Ocena
0 / 5
Polubienia
18
Pobrania
31
Wydruki
0
Wyświetlenia
816
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

So I to the end of a road and the end of the road sign would not take my normal goto for these https://www.thingiverse.com/thing:1904542

So i whipped out my trusty calipers and went home to mull my options. And this is what i came up with. The 2x4x10 block is for supergluing to the bottom of the drawer to retain the drawer from blowing away if wind goes rushing down one of those channels. Right now, unless you have very small fingers I don't think you'll be able to grab the built in grabber. I am not sure what i can do to make that easier to grab, if you have an idea message me.

Otherwise, Cache on!

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/lvRXT9k0DTq

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

0.200

Infill:

15

Filament: overture PETG white Post-Printing =============

glue the keeper on the bottom of the drawer AFTER you have inserted the drawer into the sleeve.

Category: 3D Printing

Tagi