Pwnagotchi Case for rpi0w, waveshare, RTC and UPSlite
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
(⌐■_■) if you have the combination of an pwnagotchi based on the raspberry pi zero with the waveshare display, have an…
- Ocena
- 4 / 5
- Polubienia
- 23
- Pobrania
- 371
- Wydruki
- 3
- Wyświetlenia
- 2821
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
(⌐■_■)
if you have the combination of an pwnagotchi based on the raspberry pi zero with the waveshare display, have an RTC installed and the UPS-Lite you want this case!
i included STP and STL-Files
let me know what you think!
(ﾉ◕ヮ◕)ﾉ*:・ﾟ✧
@evilsocket's pwnagotchi project is amazing!
https://github.com/evilsocket/pwnagotchi
Print Settings
Printer:
Renkforce RF1000
Rafts:
No
Supports:
Yes
Resolution:
0,3mm
Infill:
100%
Filament:
Renkforce PLA
Black How I Designed This ===================
It all started with adding the RTC...
i remixed ohaithere's pwnagotchi case in the first place as i fitted the RTC to my pi. i needed more clearance between the display and the pi. so i made small adjustments in size and printed the case.
i liked the style of [ohaithere's cases](https://www.thingiverse.com/thing:3920904) (wich are based off [3mul0r's case](https://www.thingiverse.com/thing:3897860)) so i started changing some dimensions of the case.(ﾉ◕ヮ◕)ﾉ*:・ﾟ✧
But then ... UPSlite !!!
In a moment of weakness i ordered a UPSlite V1.2 and assembled it to my pi ... now i had to redo the case of course.
sadly it got 5mm longer and 11,6mm deeper due to the battery and is no longer compatible to the powerbank-holders for the pwnagotchi cases.
i hope you enjoy the case and have fun pwning
(ﾉ◕ヮ◕)ﾉ*:・ﾟ✧
Category: Computer