Dell Studio XPS CPU Fan Replacement Holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for the Dell Studio XPS CPU fan holes, but may be useful for other CPU fans as well.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
The screws had broken the original holes on the CPU fan of a Dell Studio XPS 9100, and the computer kept shutting down hard due to overheating. After printing these and installing them, along with some fresh thermal paste, the computer has not shut down on its own for at least 5 weeks now. (After installation core temperatures in pictures)
This design was printed on its side for added strength with organic supports, .25mm nozzle, .1mm layer height, and in PETG on the MK4. The supports in the center are a little tricky to remove (the walls of the printed object will feel paper thin), but it fit all the tolerances of the original heatsink and fan mounts. The tiny ring that keeps the screw from flying out was not required with the very tight tolerances. The spring goes back in the cylinder before the screw.
Update: A year after the installation of the replacement screw holes, the computer has not complained about overheating and to my knowledge, never gone over 170F. We still regularly use this computer heavily and it has had 99% uptime.