Label Clip for Filament samples, with temperature marker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A filament clip for leftovers or sample rolls, with adjustable markers for print settings.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The great thing about filament samples is that you can keep a large assortment of colours around without a shed full of spools. Second-hand sites are an easy source for cheap 1.75 mm PLA filament samples, as they come included with most 3D print pens, and work just as well on 3D printers.
This flexible clip has an inner diameter of 10 mm that can hold sample filament rolls up to 10 meters length. The end of the filament can be inserted into a groove at the top. As a handy extra, you can mark how many meters of filament remain by inserting the filament's end further along the measurement scale next to it, which represents 0 to 5 meters, or 0 to 10 meters.
2 more scales are embedded on the side of the clip, with one to mark ideal filament temperature ("T"), 180 to 220 Celcius for PLA, with markers at every 10 and 5 degrees. What the third scale ("%") represents is up to you: Ideal buildplate temperature, filament flow, or overall quality. Insert a piece of 1.75 mm filament into the grooves up to the value that you want to remember, then cut or break it off at the edge. If the groove is too tight, try rotating the filament while pushing, or re-printing it with a different horizontal expansion setting.
PRINT SETTINGS
0.2mm layer height, 0.4mm line width, 2 walls, retraction on, combing on, no infill, no supports, no brim.
The print takes 0.6 m of filament and less than half an hour at a print speed of 20 mm/s