1 / 7
GSM020 mount vertical for HPI Vorza flux HP — zdjęcie 1
1 / 7

GSM020 mount vertical for HPI Vorza flux HP

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

SkyRC GSM020 mount for the HPI Vorza Flux HP RC buggy. Low profile.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Does its job really well for me, though it is not crash tested.

Made with low center of gravity in mind, and a nice low profile, while also taking advantage of a small empty space on the Vorza Flux HP infront of the battery tray.

Mounted with VHB tape to the 7075S main chassis (#103662).

GSM020 fits almost thight alone, but i used 2mm thick foam tape (10mm width) for friction fit. As well as gluing a Velcro strap to one side, and some more Velcro on the other side, for the strap to attach to. Making sure that nothing goes missing in the event of a crash.

Tagi