FLUX Beamo Open Bottom extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FLUX Beamo laser head socket and open bottom extension.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The theads on the piece that holds the lens tube in place on my flux beamo were cross threaded so I designed a replacement. The lens tube slides in the bottom and a M3 heat sert allows you to screw a M3 screw in to lock it in place.
The short piece is a direct replacement length wise, and the long one is used for open bottom work. As I didnt have the override usb I just make a small piece that uses 2 8x3 magnets to hold a random 29mm long rectangular magnet against the hall effect sensor under machine. You can easily modify the model to fit any magnets you have lying around.