Rewindr - Setup for CORE One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting parts of the Rewindr specific for the CORE One printer setup.
- Ocena
- 4 / 5
- Polubienia
- 49
- Pobrania
- 149
- Wydruki
- 1
- Wyświetlenia
- 1607
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
| The Rewindr is a premium rewindable spool holder for the MMU3/MMU2. It's compact and easy to use, opposed to the official clunky setup for the MMU. Compatible with the Prusa MK4, MK3, CORE One, Original Prusa Enclosure and more. |
This model provides the parts & assembly for mounting the Rewindr specific for the Prusa CORE One. It does not not contain the actual spool holders.
→ You can purchase the Rewindr on LGB-Engineering.com
Setup for CORE One
The Rewindr sits on top of the CORE One, directly next to the MMU3. This means that the filament path is extremely short, making loading a breeze. The Rewindr snaps onto special brackets, which allow ample airflow to pass under the spool-holders. The MMU3 clicks onto a special mount at the back, making removal/maintenance a breeze.
You don't need any special Prusa parts to install the MMU3 to the CORE One. You just need to drill a small 14 mm hole in the top panel for the bowden tube. This is explained in detail on LGB-Engineering.com, among all other steps in the assembly.
