Wolf Pendant (Inspired by The Witcher, Reimagined)

Designed to face the heart — for those who walk alone, but never without purpose.

This is a pendant I designed for myself. I was inspired by The Witcher pendant but wanted something different — a design without the round coin part, more personal, and more symbolic. So I created this bold, geometric wolf pendant from scratch.

The model includes a loop on top for threading a chain through. I made it thick and solid, not hollow. The wolf faces left — toward the heart — representing strength, solitude, and purpose.

I plan to print it in PLA+ filament and electroplate it at home, first with copper and then with nickel to give it a silver-like finish. I’ll sand it smooth, coat it with conductive graphite paint, and then plate it. If you're planning to try electroplating, please make sure you understand the risks and take the necessary precautions.

🖨 Print Settings (Recommended):

Infill: 100% (solid print, not hollow)

Layer Height: 0.2 mm (for smoother finish)

Shells/Perimeters: 3–5

Supports: Yes (for the loop and overhangs)
 

Of course, it doesn't print perfectly for the pendant to be used, but it's nothing a handy sandpaper can't fix. The inside ridges are pretty tricky, though, but I chose to ignore them as I will be plating them anyway. If you want, you can sandblast it and see how it turns out.

I designed this model and decided to share it for personal use only. Please don’t use it commercially. You can and should remix if you want. If you use or post it somewhere, I’d appreciate credit! :).