1 / 3
"Non-Piercing" style fursuit nosering and earring (multiple sizes)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fursuit noserings or earrings with built-in hinge with magnetic ends, tons of sizes with customization option
- Ocena
- 0 / 5
- Polubienia
- 54
- Pobrania
- 205
- Wydruki
- 0
- Wyświetlenia
- 958
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (42)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (75)Powiązane
Introduction
- Previously I've upload “one piece” style rings (see here and here), this new “non-piercing” style rings aims to fit more types and shapes of fursuit heads.
- I've provided sizes ranging from 15mm to 110mm internal radius. If you have a specific size in mind, there's an customizable OpenSCAD file.
- Update (2025/8/8): Uploaded a new revision that's nicer looking, can be printed without supports, and the hinge is also stronger! Download the files with Non-PiercingFursuitRing_rev2 in the name. (Thanks for the peeps on r/FursuitMaking for the motivations)
Printing and assembly
- The number at the end of the file name is the internal radius of ring.
- Print without supports.
- The hinge has 0.4mm gaps. For the best results, make sure your printer is well calibrated and the filament is dry. I've printed the rings successfully on a Prusa MK3.9S and a Bambu Lab A1 using old and wet PLA and PETG filament.
- Each ring uses two cylindrical magnets (10mm diameter, 10mm height). Use super glue or epoxy to glue the magnets in. I deliberately designed ring so the magnets peeks out of the hole a little bit, in order to achieve the strongest magnetic force possible.
How to customize using OpenSCAD
- Download OpenSCAD at https://openscad.org/.
- Open the .scad file (Top left corner, File→Open File).
- Turn on the Customizer Window (Top left corner, Window→Customizer).
- Adjust the parameters in the customizer window.
- In order to view how the glasses frame looks like after your adjustments, in the top left corner of the program, press the Preview (F5) button, then press the Render (F6) button.
- When you are satisfied with the result, press the Export as STL (F7) button in the top left corner of the program.
OpenSCAD parameters
- The InternalRadius determines the internal radius of ring, unit in millimeters.
- The $fn determines how many facets the ring will have. The higher the number is, the more smooth the ring will be, but the calcuation time will also be longer.
Note
- I don't personally own a fursuit head yet, so I might have missed some details, feel free to ask for changes or additional features in the comment section :)