Centauri Carbon vibration isolation feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part helps to isolate vibrations from whatever you have your printer placed on to reduce the noise.
- Ocena
- 4,5 / 5
- Polubienia
- 23
- Pobrania
- 95
- Wydruki
- 2
- Wyświetlenia
- 512
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a very simple model, just print 4 of them and slot them into the feet of your printer.
You can also stick some felt or rubber stuff to the bottom.
Lay the model on the side, this way there are 0 overhangs and it should print without any concerns.
I've used some standard PLA but it might be better to go with something that doesn't deform as much overtime as the printer is quite heavy and you have a lot of sustained load on the parts.
(Only put them on my printer a few days ago so lets see)