Blue Dragon Slug Voronoi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A blue dragon slug (Glaucus Atlanticus) in voronoi style
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Contrary to usual voronoi, I kept the head intact to keep its level of detail while allowing the body to be more sparse.
Printing Information:
- Use tree support to support the voronoi structure
- Use a brim to improve the contact surface with the printbed
- You can mimic the true colors of the blue dragon slug by painting colors in layers in the slicer if you want, but with the voronoi the result is diminished.
Note that voronoi models are ideally more vertical than horizontal to avoid needing too much support. As this is the extreme opposite, there are lots of overhangs needing supports. Those supports are, however, not too hard to remove on this model due to their compact size.
Note as well that I had to comply with the license of the base model and that the license of this model is therefore also non-commercial. Would I have had the choice, only attribution would be required. This also means that, would you have commercial permission from the base author, you can use this one as well with no extra steps.