TIG Tungsten Electrode Storage Container w/ Label
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TIG tungsten electrode storage container with place for labels and ability to add to drop into a rack.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 260
- Wydruki
- 0
- Wyświetlenia
- 851
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of the TIG Tungsten Electrode Storage Container by @LeHaDesign.
I added a flat section to the side of the top portion for applying a label. It should fit a 58mm (2.28 inch) long strip of the common 12mm (½ inch) label maker labels.
I also removed the hex at the end of the bottom portion to allow for dropping these into the hole of a storage rack for storing and organizing multiple containers. For reference, the OD of the round portion of the body is 28mm (1.102 inch).
Included are the remixed versions of the standard and looser variations, as well as the remixed f3d file. The f3d should be sized for the Standard version. To change it to the Looser version, change both of the Offset-Faces operations near the middle of the timeline from -0.1mm to -0.2mm. This should make the threads on both the bottom and top bodies slightly thinner. Ignore the suppressed Offset-Faces operations.