1 / 6
Dragon Burner mount for ANET A8 and other i3 clones
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Install a Dragon Burner toolhead on your ANET A8 and other i3 clones
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 10)Remiksy (0)Kolekcje (15)Powiązane
This mount allows you to install a Dragon Burner toolhead to your ANET A8 or other i3 clone. The linear bearings gap is adjustable between 44mm and 47mm.
Hardware required:
4 - M3 hex nuts
2 - M3 8mm bolts
2 - M3 40mm bolts
Printed with PETG, 4 perimeters, 15% infill, no supports.
The extruder mount must be turned 180º (motor facing forward), otherwise it won't fit.
Tested with sherpa mini (or extra heavy) and HGX Lite