Catra from She-Ra
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my Catra Hueforge from She-Ra and the Princesses of Power
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
Project: Catra 0.04.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x126.41mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Filaments Used:
#000000 PLA Sunlu Meta Black Transmission Distance: 1
#f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#ff0000 PLA Anycubic Bright Red Transmission Distance: 5
#7d6556 PLA BambuLab Matte Dark Brown Transmission Distance: 2
#ae96d4 PLA BambuLab Matte Lilac Purple Transmission Distance: 2
#ff8000 PLA+ Sunlu Orange Transmission Distance: 5
#e8dbb7 PLA BambuLab Matte Desert Tan Transmission Distance: 1
#d3b7a7 PLA BambuLab Matte Latte Brown Transmission Distance: 2
#ffff00 PLA Elegoo Matte Sunshine Yellow Transmission Distance: 6
#00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4
#ffffff PLA Sunlu White Transmission Distance: 5
This print uses 12 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.52mm) swap to Hot Pink
At layer #11 (0.56mm) swap to Blue Gray
At layer #14 (0.68mm) swap to Bright Red
At layer #16 (0.76mm) swap to Dark Brown
At layer #20 (0.92mm) swap to Lilac Purple
At layer #22 (1mm) swap to Orange
At layer #26 (1.16mm) swap to Desert Tan
At layer #27 (1.2mm) swap to Latte Brown
At layer #34 (1.48mm) swap to Sunshine Yellow
At layer #40 (1.72mm) swap to Turquoise
At layer #42 (1.8mm) swap to White for the rest