Mera Mera no Mi Keychain - Multi-Part 3D Printable Devil Fruit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a multi-color keychain of the Mera Mera no Mi from One Piece, designed to be printed in separate parts.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 178
- Wydruki
- 1
- Wyświetlenia
- 582
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
This is a multi-color keychain of the Mera Mera no Mi from One Piece, designed to be printed in separate parts to achieve the best quality and resistance..
The model includes two halves of the fruit, the top stem, and an internal centering piece. It’s optimized for standard single-extruder 3D printers, it is not necessary to have a multicolor printer.
PAY ATTENTION to the tolerances of the stem and the centering piece, you may need to adjust the XY horizontal expansion to fit them (usually -0,2mm is enough).
The design ensures minimal support usage (only for the internal overhangs) and can be printed with a layer height of 0.2mm but I suggest to use adaptative layer height for maximum quality.
You may need a little bit of contact glue to ensure the pieces stick together properly :)
Make sure to print the internal parts with a -0,2mm tolerance to fit them with ease.
Activate a -0,15mm elephant foot compensation to get a perfect contact surface.
Supports are only necessary for the internal overgangs of the 2 halves.