Peloton OontZ Angle 3 Ultra Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace Peloton spin bike's [1] default speakers with OontZ Angle 3 ULTRA (Cambridge SoundWorks) [2] by mounting it…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 1387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
Replace Peloton spin bike's [1] default speakers with OontZ Angle 3 ULTRA (Cambridge SoundWorks) [2] by mounting it right under the screen and connecting directly by stereo cable to eliminate bluetooth delays. Better, louder sound with deeper base for $39.
When laying out the mount on the printer bed I had to rotate it in this order: Y -90, X -30, Z 90. Printing at 20% infill with 0.2mm layer height has sufficient flex.
Requires one 30mm (size 8) bolt, nut, washer to tighten the mount around the bar that holds bike's tv.
The 3.5mm stereo cable can be wrapped around the tv mount and down into speaker. I replaced mine with the one that has 90 degree plug and flat cable [3].
Print instructions
Category: Sport & Outdoors