Side lamp Prusa CoreOne
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Lamp attached to CoreOne printer with magnets
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I created this lamp for my workspace right to the printer. With 6 10x5mm neodymium magnets, it attaches perfectly to the printer (I believe 4 strong magnets is more than enough).
The lamps used is a pair of T5 30cm Led Lamp like this: https://es.aliexpress.com/item/1005006782634990.html more than enough.
This is the second model I've made for the lamp: the first one had the weight further from the base, which made it more prone to falling (besides, it turned out much uglier, so I didn't plublish it :| ). This design seeks to place the weight at the level of the printer's profile and to create a shade to avoid dazzling anyone who passes by the printer. Both objectives are achieved, and the lighting is fabulous.
If you want to change the model you can get it here: https://www.tinkercad.com/things/8LoJrAGIn2H-core-one-side-lamp