Portable Paint Station for Miniatures
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Miniature portable painting station
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 954
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
Was using a crappy cardboard box to transport all of my painting supplies to go and paint. Designed this up with Citadel Paint in mind. The wet pallet box holder is designed around the Army Painter wet pallet.
The photos are version 1. I did a few updates after printing to make the paint brush and water cup overhangs slightly shorter because the back row was unusable on V1. Also the wet pallet box was a tad too tight. I've shorten the overhangs by 15mm and opened the wet pallet box by 5mm on height and 2mm on width. They should be better now.
I printed the main piece at 40 degrees to minimize support material and added my own integrated supports that are easily snapped off for the main part. The two cups/holders were printed upright with standard support material added under the overhang pieces. Also nevermind the crazy colors I printed in, this was my ‘project’ spool of combined filament.
0.4mm nozzle
3 walls
10% infill.