1 / 2
DS041MG servo gear remix for Stair Climbing Rover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The servos from the original Stair Climbing Rover are unobtainium.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 388
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
The servos used in the design of the Stair Climbing Rover, TGY-R5180MG, are no longer available. DS041MG servos fit in the Rover's arms, but needs a different configuration for the gears.
The gears are printed upside down. A tiny bit of support is required for the counterbore screw holes. I suggest using three perimeters instead of default two (assuming 0.4 nozzle).