1 / 4
Chat64 Cartridge (THT Version) for Commodore 64 (C64)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom cartridge I made for the Chat64 (https://chat64.nl)
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a custom model for the THT version (https://www.chat64.nl/downloads.php) of the Chat64 cartridge. The original model fit a bit tight in my breadbin so I created this and added a few QOL enhancements:
- The “top” takes an M3xD5 threaded insert to be used with a 16mm M3 countersunk machine screw. This preserves the top face.
- Added a label cutout and “grip” detailing
These are a bit tricky to print in FDM so I would suggest the following:
- Print both sides face UP
- I used normal supports set to “snug”
- Top & Bottom Z distance = 0
- Top & Bottom interface layers = 3
- Support/object xy distance = 0.5
- Support/object first layer = 0.2
- PLA for the material, PETG for the support interface material
- I printed the button in clear PC
I also enabled ironing at 60mm/sec, 30% flow, 0.2 inset with a 0.4mm nozzle