1 / 2
BTT Eddy-NG mount for Creality K1 series (higher mounting position)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eddy (USB/Duo) mount
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
The original model was much to close to the print bed on my K1C so I moved the mounting holes by 0.6mm to get a higher position. Now the tap function works.
Print in ABS or some other high temperature material.
