1 / 4
Gaggia Evo Classic/Pro E24 Water reservoir cover/Tamper holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Water reservoir cover with a removable puck screen holder, tamper holder, or any accessory up to 65 mm in diameter.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
The model is very easy to print.
The puck screen holder is 60 mm wide. The tamper slot has a diameter of 65 mm, which provides enough space for all common round espresso tools I’m aware of.
The espresso stirrer holder is 50 mm deep and also functions as a handle for removing the cover.
My print recommendations:
15–20% infill, no supports needed. I also use Arachne as the wall generator.
Like this model? Want to support me?
Buy me a coffee <3
buymeacoffee.com/pyz3d