Guitar Paint Rotisserie
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Painting Stand for a workmate style work bench
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this model to allow me to rotate a Strat style body while applying a wipe on poly finish,
You will need a 29-30mm rod for the main shaft I used a 29mm/1" 1/8 broom handle
parts connect with wood screws and drill pilot holes in the broom handle first.
2xM5 bolts are used in the work mate paint support to be able to lock down the rotation in any position you could probably get away with one, and 1xM5 countersunk bolts to connect the handle to the crank,
I Printed this in PLA at 0.2mm with 50% infill you could probably get away with less or more its up to you.