DIY CNC hand / Wood planer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed some kind of contraption that would allow me to create a recess in an MDF board for an aluminum plate.
- Ocena
- 0 / 5
- Polubienia
- 69
- Pobrania
- 150
- Wydruki
- 0
- Wyświetlenia
- 1675
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v2.0
To create the same contraption as the one I designed and built, you'll need:
8- M4 screws and nuts
8- ball bearings (LM10UU 10x19x29 SCV10UU), 4 of which are bare and without any components, and 4 of which are with mounting hardware, their dimensions can be seen in the photos.
2- 2020 aluminum profiles (choose your length; mine are 1 meter)
4- 10mm diameter rods. Mine are from Canon printers (free). (about 565mm)
A demonstration of how everything is assembled and how to use it can be found in the link below on my YouTube channel:
P.S:
I printed everything in PETG, which is a bit less tolerant when it comes to actual dimensions. If something doesn't fit (you can print by cutting the model – just the holes) – let me know. I can always tweak the design a bit (reduce or enlarge the holes) and include it in the files.