Portrait Tablet Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend at work wanted to use his tablet on a stand but in portrait orientation. None of the stands I made where…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 89
- Wydruki
- 2
- Wyświetlenia
- 538
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
A friend at work wanted to use his tablet on a stand but in portrait orientation. None of the stands I made where steady enough so made this one. Can also be used with a tablet in landscape. Can take quite large tablet. I have used it with a microsoft surface pro.
Make 2 Triangle sections and three Bar sections. It should fit together without out glue, but super glue can be used if needed.
Print Settings
Printer:
CR10
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
25%
Notes:
Takes about 6 hours to print 2 triangles and 3 bars. Should just clip together, if it needs it use some super glue.
Category: Tablet