1 / 3
Road bike reflector mount for Biltema reflex (updated feb 2026) — zdjęcie 1
1 / 3

Road bike reflector mount for Biltema reflex (updated feb 2026)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for front reflector from Biltema. Made to fit the 31.8mm handlebar, to be mounted in the middle of the handlebar.

Ocena
0 / 5
Polubienia
8
Pobrania
46
Wydruki
0
Wyświetlenia
168
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Updated 2026-02-20: A reinforced model is added because I hade a few snaps in different places.

Mount in the center of the handlebar (31.8mm mount) next to stem. It is "off center" to be able to have it somewhat centered. I mounted it with a M4 screw and a short small (od 5mm) M4 threaded insert. You could use a longer screw and a nut if you like.

The reflector is the front reflector from the Biltema kit “Biltema Cykelreflexsats, fram och bak” 27-0134. It may fit others. No glue needed, but a drop of superglue would reduce some rattle that I don't hear anyway.

I printed it in PETG, choose whatever suits you. Needs some flexibility to get it around the handlebar.

There is one for a rear reflector too: https://www.printables.com/model/1379433-road-bike-saddle-bag-reflector-and-light-mount-bil

I printed  it with support according to image provided. Support is painted manually in Orca slicer.

Made with OpenSCAD

Tagi